Cisco Catalyst IR1821 User Manual

CHAPTER 7
Cisco Wi-Fi Interface Module (WIM)
This chapter contains the following sections:
• Overview, on page 57
• Installation, on page 59
• Transmit Power and Receive Sensitivity, on page 61
• Thermal Mitigation, on page 64
Overview
This overview describes the Cisco Wide Pluggable Form Factor WIFI6 AP Module for Industrial Routers.
The PID is WP-WIFI6-x.
The Cisco Wi-Fi Interface Module will be refered to as the WIM from this point forward.
Highlights of the WIM are:
• Pluggable 802.11ax module for IoT Routers
• WiFi-6 (802.11ax), 2x2 MIMO with 2 spatial streams
• Supports WGB Mode
• EWC Controller Support
• Field Replaceable Unit (FRU), however does not support OIR (Online Insertion and Removal)
• Versatile RF coverage with external RP-SMA antenna connectors
• Flexible Antenna Port feature support
The following graphic illustrates the front panel of the WIM.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
57

Cisco Catalyst IR1821 Specifications

General

Brand	Cisco
Model	Catalyst IR1821
Category	Network Router
Language	English