Cisco EX Series User Manual

Setting the Administrator settings menu password
When starting up the system for the first time, the Administrator
Settings menu password is not set.
NOTE: We strongly recommend that you define a password to
protect the Administrator Settings menu, because these settings
affect the behavior of the video conference system.
1. Go to Home > Settings > Administrator settings > Set menu
password.
On the remote control, press the # key to toggle between
lower or upper case characters and numbers: abc/
ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with an asterisk (*).
3. Select Save to confirm the changes, or Cancel to leave
without saving.
4. Press Home ( ) to exit.
Back to task overview
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
22
Getting Started Guide
Contents
Introduction
User interfaces
Configuration
Appendices
Contacts
Configuration

Cisco EX Series Specifications

General

Brand	Cisco
Model	EX Series
Category	Conference System
Language	English