User interfaces
The principal operating device for your Cisco TelePresence
video conference system is either a remote control or a Touch
controller. The remote control is not available for the EX Series
and MX Series or the SX80.
Additionally, you can configure your system through its web
interface, provided that the system is already connected to a
network and you know the IP address.
In the appendices we describe how to use the Touch control-
ler and the remote control and the on-screen menu. We also
describe how to navigate and use the web interface.
Touch controller
Remote control and on-screen
menu
Web interface
Cisco TelePresence Video Systems
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
6
Getting Started Guide