Cisco Firepower 2100 Series Hardware Installation Guide

Although the hardware supports hot swapping for the SSDs, the software does not, so you must power down
the chassis before removing and replacing them.
For More Information
• See Front Panel LEDs, on page 12 for the location and description of the SSD LEDs on the front panel.
• See Remove and Replace the SSD, on page 65 for the procedure for removing and replacing the SSD.
Supported SFP/SFP+ Transceivers
The SFP/SFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical
package. It is a hot-swappable optical or electrical (copper) interface that plugs into the SFP/SFP+ ports on
the fixed ports and the network module ports, and provides Ethernet connectivity.
Figure 20: SFP Transceiver
Bail clasp2Dust plug1
Transmit optical bore4Receive optical bore3
Safety Warnings
Take note of the following optical connection warnings:
Statement 1051—Laser Radiation
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments.
Warning
Cisco Firepower 2100 Series Hardware Installation Guide
31
Overview
Supported SFP/SFP+ Transceivers

Cisco Firepower 2100 Series Specifications

General

Brand	Cisco
Model	Firepower 2100 Series
Category	Firewall
Language	English