Cisco Firepower 2100 Series Hardware Installation Guide

DescriptionPID
Slide rail brackets (spare)FPR2K-RAIL-BRKT=
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords or jumper power cords provided with the security appliance are supported.
Note
The following power cords are supported.
Figure 21: Argentina CAB-ACR
Cord set rating: 10 A, 250 V2Plug: IRAM 20731
Connector: IEC 60320/C133
Figure 22: Australia CAB-ACA
Cord set rating: 10 A, 250 V2Plug: A.S. 31121
Connector: IEC 60320/C133
Cisco Firepower 2100 Series Hardware Installation Guide
37
Overview
Power Cord Specifications

Cisco Firepower 2100 Series Specifications

General

Brand	Cisco
Model	Firepower 2100 Series
Category	Firewall
Language	English