Cisco Firepower 2100 Series Hardware Installation Guide

Figure 1: Firepower 2110/2120
Figure 2: Firepower 2130/2140
The following table lists the features for the Firepower 2100 series.
Table 1: Firepower 2100 Series Features
2140213021202110Feature
• Common Criteria Certification for the Network Device Collaborative Protection
Profile, (NDcPPv2.2E), IPS Extended Package (IPSEP v2.11), Firewall
Collaborative Protection Profile Module (MOD_FW_v1.4e), and Virtual Private
Network Gateway Protection Profile Module (MOD_VPNGW_v1.1) on ASA
9.12.x, FTD 6.4.x and FX-OS 2.6.x
• Federal Information Processing Standards (FIPS) 410-2 (FTD 6.4.x, FX-OS 2.6.x,
and ASA 9.12.x)
• Department of Defense Information Network Approved Product List (DoDIN
APL)
• US Government Compliance for IPv6 (USGv6) (FTD 6.4.x and ASA 9.12.x)
• USGv6 Certification Approval under the R1 Profile for the Product Classification
NPP (FTD 7.0.x)
See Install the FIPS Opacity Shield in a Two-Post Rack, on page 82 and
Install the FIPS Opacity Shield in a Four-Post Rack, on page 85 for the
procedures for installing the FIPS shield and for configuring the 2100 for
FIPS mode.
Note
Security standards
certifications
Cisco Firepower 2100 Series Hardware Installation Guide
2
Overview
Features

Cisco Firepower 2100 Series Specifications

General

Brand	Cisco
Model	Firepower 2100 Series
Category	Firewall
Language	English