Cisco Firepower 4100 Series Hardware Installation Guide

For some earlier production Firepower 4100 series chassis, you may experience difficulty using the
GLC-TE SFP on the management port or fixed ports. Contact Cisco TAC for support if you encounter
problems with the GLC-TE SFP.
Caution
The following table lists the Cisco supported transceivers.
Table 7: Supported Cisco SFP/SFP+ Transceivers
PIDOptics Type
1G
GLC-SX-MMD1G-SX
GLC-LH-SMD1G-LH/LX
GLC-EX-SMD1G-EX
GLC-ZX-SMD1G-ZX
GLC-T1G 1000Base-T
GLC-TE1G 1000Base-T
10G
SFP-10G-SR10G-SR
SFP-10G-SR-S10G-SR-S
SFP-10G-LR10G-LR
SFP-10G-LR-S10G-LR-S
SFP-10G-LRM10G-LRM
SFP-10G-ER10G-ER
SFP-10G-ER-S10G-ER-S
SFP-10G-ZR-S10G-ZR-S
SFP-H10GB-CU1M10G Cu, 1m
SFP-H10GB-CU1-5M10G Cu, 1.5m
SFP-H10GB-CU2M10G Cu, 2m
SFP-H10GB-CU2-5M10G Cu, 2.5m
Cisco Firepower 4100 Series Hardware Installation Guide
22
Overview
Supported SFP/SFP+ Transceivers

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English