Cisco Firepower 4100 Series Hardware Installation Guide

CHAPTER 2
Prepare for Installation
This chapter prepares you to install the security appliance, and contains the following sections:
•
Installation Notes and Warnings, page 37
•
Safety Recommendations, page 39
•
Maintain Safety with Electricity , page 40
•
Prevent Electrostatic Discharge Damage , page 40
•
Site Environment , page 41
•
Power Supply Considerations, page 41
•
Equipment Rack Configuration Considerations, page 41
Installation Notes and Warnings
Be sure to read the Regulatory and Compliance Safety Information document before installing the security
appliance.
Take note of the following warnings:
Statement 1028—More Than One Power Supply
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Warning
Statement 1029—Blank Faceplates and Cover Panels
Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous
voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt
other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system
unless all cards, faceplates, front covers, and rear covers are in place.
Warning
Cisco Firepower 4100 Series Hardware Installation Guide
37

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English