Cisco Firepower 4100 Series Hardware Installation Guide

CHAPTER 1
Overview
This chapter describes the hardware features of the Cisco Firepower 4100 security appliance, and contains
the following sections:
•
About the Cisco Firepower 4100 Security Appliance, page 1
•
Deployment Options, page 4
•
Package Contents, page 4
•
Serial Number Location, page 5
•
Front Panel, page 6
•
Front Panel LEDs, page 7
•
Rear Panel, page 8
•
Network Modules, page 9
•
Power Supply Modules, page 18
•
Fan Modules, page 20
•
Supported SFP/SFP+ Transceivers, page 21
•
Power Cord Specifications, page 24
•
Hardware Specifications, page 34
About the Cisco Firepower 4100 Security Appliance
The Cisco Firepower 4100 security appliance is a standalone modular security services platform with a one
RU form factor. It is capable of running multiple security services simultaneously and so is targeted at the
data center as a multi-service platform. The Firepower 4100 chassis contains the following components:
•
Network module 1 with eight fixed SFP+ ports (1G and 10G connectivity), the management port, RJ-45
console port, Type A USB port, PID and S/N card, locator indicator, and power switch
•
Two network modules slots (network module 2 and network module 3)
•
Two (1+1) redundant power supply module slots
Cisco Firepower 4100 Series Hardware Installation Guide
1

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English