Cisco IE 2000 User Manual

8
Front Panel Overview
This section describes the front panel components:
 4, 8, or 16 10/100BASE-T Ethernet ports
 10/100/1000 uplink ports (available on some models, see Table 1 on page 6)
 Dual-purpose ports (available on some models, see Table 1 on page 6)
 SFP module slots (available on some models, see Table 1 on page 6)
 RJ-45 console port
 USB mini-Type B (console) port
 LEDs
 Power connectors
 Alarm connector
 Flash memory card slot
All IE 2000 switches have similar components, as shown in Figure 1 on page 9, Figure 2 on page 10, Figure 3 on
page 11, and Figure 4 on page 12.
Cisco IE-2000-16TC-G-N 16 10/100BASE-T downlink ports
2 Gigabit Ethernet dual-purpose uplink ports
Supports the IEEE-1588 standard for synchronizing clocks and NAT.
LAN Base
with 1588
and NAT
Cisco IE-2000-16TC-G-X 16 10/100BASE-T downlink ports
2 Gigabit Ethernet uplink ports
2 100 Mb/s SFP module uplink slots
Supports the IEEE-1588 standard for synchronizing clocks.
Can enable NAT by license upgrade.
LAN Base
with 1588 and
conformal coat
Cisco IE-2000-16TC-L 16 10/100BASE-T downlink ports
2 Fast Ethernet dual-purpose uplink ports
2 100 Mb/s SFP module uplink slots
LAN Lite
Table 1 Switch Descriptions (continued)
Model Description Software Image

Cisco IE 2000 Specifications

General

Brand	Cisco
Model	IE 2000
Category	Switch
Language	English