EasyManuals Logo
Home>Cisco>Switch>IE 2000

Cisco IE 2000 User Manual

Cisco IE 2000
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
88
Cables and Adapters
SFP Module Cables, page 88
Cable Pinouts, page 91
Console Port Adapter Pinouts, page 92
SFP Module Cables
Each port must match the wave-length specifications on each end of the cable, and for reliable communications, the
cable must not exceed the allowable length. Copper 1000BASE-T SFP transceivers use standard four twisted-pair, CAT5
(or greater) cable at lengths up to 328 feet (100 meters).
Notes
The maximum operating temperature of the switch varies depending on SFP module type. See Table 2 on page 17
for supported temperature ranges.
Modal bandwidth applies only to multimode fiber (MMF).
A mode-field diameter/cladding diameter = 9 micrometers/125 micrometers.
1000BASE-LX/LH SFP modules connected with MMF over a short link distance require a mode-conditioning patch
cord.
Ordinary patch cords can cause transceiver saturation, resulting in an elevated bit error rate (BER). Using the
1000BASE-LX/LH SFP module with 62.5-micron diameter multimode fiber (MMF) requires a mode-conditioning
patch cord between the single mode fiber (SMF) SFP module and the MMF cable on both the send and receive link
ends.
Link distances greater than 984 feet (300 m) require a mode-conditioning patch cord.
1000BASE-ZX SFP modules can send data up to 62 miles (100 km) by using dispersion-shifted SMF or
low-attenuation SMF. The distance depends on fiber quality, the number of splices, and the connectors.
Fiber-optic cable spans less than 15.43 miles (25 km) require a 5-decibel (dB) or 10-dB inline optical attenuator
between the fiber-optic cable plant and the receiving port on the 1000BASE-ZX SFP module.
Table 19 Industrial and Rugged SFPs—Fiber-Optic SFP Module Port Cabling Specifications
Type of SFP
Module
Model Wavelength
(nanometers)
Fiber
Type
Core
Size/Claddin
g Size
(micron)
Modal
Bandwidth
(MHz/km)
Cable Distance
1000BASE-LX/LH GLC-LX-SM-RGD 1310 M
SMF
62.5
50.0
50.0
G.652
500
400
500
1804 feet (550 m)
1804 feet (550 m)
1804 feet (550 m)
6.2 miles (10 km)
1000BASE-SX GLC-SX-MM-RGD 850 MMF 62.5/125
62.5/125
50/125
50/125
160
200
400
500
722 feet (220 m)
902 feet (275 m)
1640 feet (500 m)
1804 feet (550 m)
1000BASE-ZX GLC-ZX-SM-RGD 1550 SMF G.652 43.4 to 62 miles
(70 to 100 km)

Table of Contents

Other manuals for Cisco IE 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco IE 2000 and is the answer not in the manual?

Cisco IE 2000 Specifications

General IconGeneral
BrandCisco
ModelIE 2000
CategorySwitch
LanguageEnglish

Related product manuals