Cisco IE 3000 Getting Started Guide

5
Cisco IE 3000 Switch Getting Started Guide
OL-16234-01
Cisco IE 3000 Switch Getting Started Guide
Running Express Setup
When you first set up the switch, you should use Express Setup to enter the initial
IP information. Doing this enables the switch to connect to local routers and the
Internet. You can then access the switch through the IP address for additional
configuration.
You need this equipment to set up the switch:
• A PC with Windows 2000, Windows Vista, Windows 2003 or XP installed.
• A web browser (Internet Explorer 6.0, Internet Explorer 7.0, or Firefox 2.0)
with JavaScript enabled.
• A straight-through Category 5 Ethernet cable to connect your PC to the
switch.
Disable any pop-up blockers or proxy settings in your browser software and any
wireless client running on your PC.
Step 4
Push in the upper and lower module latches to
secure the module to the switch.
Step 5
If you are installing a second module, repeat Step 2 to Step 3, but secure the second module
to the right side of the first module.
202336

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English