Cisco Linksys E4200 User Manual

Linksys E4200
TZO .com
Chapter 2: Advanced Configuration
Setup > Advanced Routing
This screen is used to set up the router’s advanced
functions . Dynamic Routing automatically adjusts how
packets travel on your network . Static Routing sets up a
fixed route to another network destination .
Setup > DDNS > TZO
Email Address Enter the email account for your TZO
account .
TZO Password Enter the password for your TZO account .
Domain Name Enter the domain name for your TZO
account .
Internet IP Address The router’s Internet IP address is
displayed . Because it is dynamic, it will change periodically .
Status The status of the DDNS service connection is
displayed .
Update To manually trigger an update, click Update .
Setup > MAC Address Clone
A Media Access Control (MAC) address is a 12-digit code
assigned to a unique piece of hardware for identification .
Some ISPs require you to register a MAC address for
Internet access . If your computer’s MAC address is
registered with your ISP and you do not wish to re-register
the MAC address, then you may assign the registered MAC
address to the router with the MAC Address Clone feature .
Setup > Advanced Routing
Advanced Routing
NAT
Enabled/Disabled If this Router shares your Internet
connection for your local network, keep the default,
Enabled . When Network Address Translation (NAT) is
disabled, dynamic routing is available .
Dynamic Routing (RIP)
Dynamic routing uses the Routing Information Protocol
(RIP) . This option enables the router to automatically
exchange routing tables with the other router(s) . The
router determines the network packets’ route based on
the fewest number of hops between the source and the
destination .
Enabled/Disabled When NAT is disabled, the Dynamic
Routing option is available . To use the Dynamic Routing
option, select Enabled .
Setup > MAC Address Clone
MAC Address Clone
Enabled/Disabled To have the router clone the MAC
address you specify below, select Enabled .
MAC Address Enter the MAC address registered with
your ISP .
Clone My PC’s MAC Click this option to clone the MAC
address of the computer you are using .
Static Routing
A static route is a pre-determined pathway that network
information must travel to reach a specific host or
network . Enter the information described below to set up
a new static route .
Route Entries To set up a static route between the router
and another network, select a number from the drop-
down list . Click Delete This Entry to delete a static
route .
Enter Route Name Enter a name for the route, using a
maximum of 25 alphanumeric characters .
Destination LAN IP Enter the IP address of the remote
network or host to which you want to assign a static route .
(LAN stands for Local Area Network .)
Maximum Performance Wireless-N Router
9

Cisco Linksys E4200 Specifications

General

Brand	Cisco
Model	Linksys E4200
Category	Network Router
Language	English