Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 13
Camera guide
Codec C40 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Connect the HDMI cable:
• From the HD VIDEO OUT (HDMI) connector on the
camera.
• To the HDMI 1 IN (HDMI) connector on the Codec C40.
Connect the camera control cable:
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C40. Visca™ protocol is supported.
Codec C60 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Connect the HDMI cable:
• From the HD VIDEO OUT (HDMI) connector on the
camera.
• To the HDMI 1 IN (HDMI) connector on the Codec C60.
Connect the camera control cable:
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C60. Visca™ protocol is supported.
Codec C90 configurations
Connecting to the PrecisionHD Cameras 1080p12x and
1080p4x*
Basic setup
Connect the HDMI cable:
• From the HD VIDEO OUT (HDMI) connector on the
camera.
• To the HDMI 1 (HDMI ) connector on the Codec C90.
Connect the camera control cable:
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C90. Visca™ protocol is supported.
Other configuration for 1080p12x
The HDMI <1..4> and HD-SDI <1..4> connectors can be
used for the camera. The HDMI and HD-SDI can be used
simultanously.
Connect the HD-SDI cable:
• From the HD-VIDEO OUT (HD-SDI) connector on the
camera.
• To the HD-SDI <1..4> connector on the Codec C90.
1
1
Output connector
Input connector
Codec connectors
Camera
control
HDMI 1HD-SDI
Camera
control
HDMI 1
Camera
control
HDMI 1
To Next Page
Loading...
Need help?
General
