Cisco Precision 40 User Manual

Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 7
Camera guide
PrecisionHD Camera 1080p4x
Part number (for C series): CTS-PHD-1080P4XS=
HDMI and camera control
HDMI video out
• HDMI is the video out source.
• The maximum resolution is 1080p30/720p60.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Daisy chain control is not supported. The camera can be used
in a chain of multiple cameras, but only as the last camera in
the chain.
Power
• When the camera is used with a Cisco codec, power is
supplied through the Camera control cable.
• When the camera is used with non-Cisco codecs, you
may have to connect the power separately.
USB
For future use.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
CAUTION! Do not pan or tilt the PrecisionHD 1080p4x camera
by hand.
NOTE: The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD Camera 1080p4x (the
PrecisionHD Camera 1080p4x*).
* Available for a limited period of time.
See the “Technical specifications” on page 36 section for details
The orange LED is lit during a call.
The green LED is continuously lit when
power is On, but it flickers when receiving
signals from the remote control.
USB
HDMI Video
out
Power supply
Camera control and
power
Kensington lock
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface

Cisco Precision 40 Specifications

General

Brand	Cisco
Model	Precision 40
Category	IP Camera
Language	English