Cisco Precision 40 User Manual

Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017 Copyright © 2017 Cisco Systems, Inc. All rights reserved. 17
Camera guide
Pin-out for cables
If you must assemble your own cables, the tables show the pin-out required.
Camera cables
HDMI cable
The HDMI cable delivered with the camera is 5 meters.
Maximum length is 15 meter with a category 2 certified good
quality HDMI cable. This cable can be used with the C20, C40,
C60 and C90 Codecs.
Part number: CAB-2HDMI-5M=
HD–SDI cable
The HD-SDI cable must be purchased separately. The
maximum recommended length of HD–SDI cable is 100
meters. This cable can be used with the C90 Codec.
HDMI to DVI–D adapter
A HDMI to DVI–D adapter is used when connecting a camera to
a MXP Codec or a Video Switch.
Daisy chain camera cable
CAB-VCDC-6.5M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-6.5 m
CAB-VCDC-20M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-20 m
Camera cable
Control cable for use with C90, C60, C40:
• CAB-VC-5M= Visca Control Cable 5 m - DB9 to RJ45
• CAB-VS-6.5M= Visca Control Cable 6.5 m - DB9 to RJ45 -
requires PSU-CAM-V=
• CAB-VS-20M= Visca Control Cable 20 m - DB9 to RJ45 -
requires PSU-CAM-V=
Pin-out—Daisy chain camera cable
RJ11 to RJ45 (8 pin shielded)
Signal name R J11
pin
RJ45
pin
Signal name
GND 1 2 GND
Presence
+12Vd c
2 1 Presence
+12Vd c
TX 3 3 RX
RX 4 6 TX
GND 5 7 GND
NC 6 8 NC
NA NA 4 NC
NA NA 5 NC
Pin-out—camera cable
RJ45 (8 pin shielded) to D-SUB
Signal name RJ45
pin
D-SUB
pin
+12Vd c 1 4
GND 2 5
RX 3 2
TX 6 3
NC 4 1
NC 5 6
GND 7 5
+12Vd c 8 4
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera

Cisco Precision 40 Specifications

General

Brand	Cisco
Model	Precision 40
Category	IP Camera
Language	English