Cisco Profile Series Getting Started Guide

7
Prole Series, Codec C Series and Quick Set C20 / C20 Plus Getting started guide
D14639.03 Prole Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
5 6
Add the system to the network
Contact your system administrator, or service provider, for information
about the network settings:
• For H.323 calls, this will include system name, H.323 alias, gatekeeper
address, etc.
• For SIP calls, similar types of information will be supplied.
• For networks administered through Cisco TMS (Cisco TelePresence
Management Suite), your Cisco TMS administrator will help you to get
online.
The H.323 prole and SIP prole are congured from the Advanced
conguration menu:
• Go to Settings > Administrator settings > Advanced conguration
and search for H323 or SIP, or select H323 > Prole 1 or SIP > Prole
1 from the menu.
• Expand the items you want to edit and enter the required information. If
in doubt, contact your system administrator or your service provider.
Verify your settings
Verify the settings by reviewing the System Information page.
1. Go to Settings > System Information
2. Verify the previous congurations.
• If you successfully registered to a Gatekeeper the Status will
show Registered. If the registration failed the Status will show Not
registered.
• If you successfully registered to a SIP server the Status will show
Registered. If the registration failed the Status will show Not
registered.
3. Press Home (
) to exit.
7
Adjust the date and time settings
Check that the date and time settings are correct. The date and time are
located in the upper right corner of the screen.
To adjust the date and time settings:
1. Go to Settings > Date and time
2. When Set date and time is set to Auto there will be an automatic
update of the date and time settings. If you want to manually adjust
the date and time settings, select Manual and enter the Day, Month,
Year and Time. After having adjusted the settings manually, you can
set the Set date and time back to Auto for automatic update.
3. Select the appropriate Time zone from the list of GMT time zones.
4. Select the appropriate Date format from the list.
5. Select the appropriate Time format from the list.
6. Press Home (
) to exit.
Congure the H.323 Prole in the
Advanced conguration menu
Congure the SIP Prole in the
Advanced conguration menu
Search
Audio
Cameras
Conference 1
Experimental
GPIO
H323
NAT
Prole 1
H323Alias
CallSetup
Gatekeeper
Authentication
PortAllocation: Dynamic
Network 1
NetworkServices
ADVANCED CONFIGURATION
+
+
+
+
+
_
+
+
+
+
+
+
+
_
Search
Phonebook
Provisioning
SIP
Prole 1
DefaultTransport: Auto
TlsVerify: Off
Type: Standard
Outbound: Off
URI: rstname.lastname@company.com
Proxy 1
Proxy 2
Proxy 3
Proxy 4
Authentication
Security
ADVANCED CONFIGURATION
+
+
+
+
+
+
+
_
_
+
Contents
Password protection
Introduction
Congure your system
Operating devices
The menu system
The web interface
Congure your system

Cisco Profile Series Specifications

General

Brand	Cisco
Model	Profile Series
Category	Conference System
Language	English