Starting from Home screen, use the Cursor keys on the
remote control to select the Settings eld in the upper
left corner of the screen.
Press OK on the remote control.
Use the Down Cursor button on the remote control to
navigate down to Do Not Disturb (one step down) and
use the OK button on the remote control to set it to On
or O (toggling). If your system has Intelligent Proximity
enabled you will need to press the Down Cursor button
twice.
Press the OK key on the remote control to exit the menu,
putting changes into eect.
Availability
Enable Do Not Disturb
Your system can be set up so that it
does not respond to incoming calls.
When set to Do Not Disturb, ringtones
are muted and call attempts made
by others to reach you will appear as
missed calls. You may, however, place
calls as much as you like.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the system will return to normal
operation), but this may have been
changed to a dierent setting by your
Video Support Team.
About Do Not Disturb
To Next Page
Loading...
Need help?
General
