Cisco SX10 User Manual

16
D1509707 User Guide
Cisco TelePresence TRC 6
Produced: April 2016 for CE 8.1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.
Starting from Home screen, use the Cursor keys on the
remote control to select the Settings eld in the upper
left corner of the screen.
Press OK on the remote control.
Use the Down Cursor button twice on the remote
control to select Standby. If your system has Intelligent
Proximity enabled you will need to press the Down
Cursor button three times.
Press the OK key on the remote control to exit the menu,
putting changes into eect.
Availability
Enable Standby
Your system can be set to Standby
to save power. You will still be able
to receive calls as usual.
About Standby

Cisco SX10 Specifications

General

Brand	Cisco
Model	SX10
Category	Conference System
Language	English