Cisco UCS C480 M5 Service Manual

Table 10: 1600 W AC Specifications
SpecificationDescription
Nominal range: 200–240 VAC
(Range: 180–264 VAC)
AC Input Voltage
Nominal range: 50 to 60Hz
(Range: 47–63 Hz)
AC Input Frequency
9.5 A at 200 VACMaximum AC Input current
1250 VA at 200 VACMaximum input volt-amperes
30 A at 35° CMaximum inrush current
80 ms at 1600 WMaximum hold-up time
1600 W at 200–240 VACMaximum output power per PSU
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum certified)Efficiency rating
RSP2Form factor
IEC320 C14Input connector
Power Cord Specifications
Each power supply in the server has a power cord. Standard power cords or jumper power cords are available
for connection to the server. The shorter jumper power cords, for use in racks, are available as an optional
alternative to the standard power cords.
Only the approved power cords or jumper power cords listed below are supported.
Note
Table 11: Supported Power Cords
Length
(Meters)
Length
(Feet)
Description
2.58.2CAB-250V-10A-AR
AC power cord, 250 V, 10 A
Argentina
Cisco UCS C480 M5 Server Installation and Service Guide
129
Server Specifications
Power Cord Specifications

Cisco UCS C480 M5 Specifications

General

Brand	Cisco
Model	UCS C480 M5
Category	Server
Language	English