Cisco UCS C480 M5 Service Manual

Figure 6: Attaching the Inner Rail to the Side of the Server
Pegs on side of server2Inner rail1
Step 2 Open the front securing plate on both slide-rail assemblies. The front end of the slide-rail assembly has a spring-loaded
securing plate that must be open before you can insert the mounting pegs into the rack-post holes.
On the outside of the assembly, push the green-arrow button toward the rear to open the securing plate.
Figure 7: Front Securing Mechanism, Inside of Front End
Securing plate shown pulled back to the open
position
3Front mounting pegs1
-Rack post between mounting pegs and opened
securing plate
2
Step 3 Install the outer slide rails into the rack:
a) Align one slide-rail assembly front end with the front rack-post holes that you want to use.
The slide rail front-end wraps around the outside of the rack post and the mounting pegs enter the rack-post holes
from the outside-front.
The rack post must be between the mounting pegs and the open securing plate.
Note
Cisco UCS C480 M5 Server Installation and Service Guide
17
Installing the Server
Installing the Server in a Rack

Cisco UCS C480 M5 Specifications

General

Brand	Cisco
Model	UCS C480 M5
Category	Server
Language	English