DescriptionParameter
The field of view determines the width of the view that you can see from the
camera. The higher degree you set, the wider the image.
Default: 81
Options: 65, 70, 75, 81
Field of view
Adjust the brightness of the camera image to suit the available light.
Drag the slider left to decrease the brightness or right to increase the
brightness.
The camera uses facial detection when it sets the correct auto exposure. But
if your place is brightly backlit or front lit, then it may under or overexpose
your image. Adjust the Brightness setting if you are silhouetted or overexposed
in a video call.
Brightness
The following table describes the video image parameters available on the Advanced tab.
Table 5: Video Image Settings on the Advanced Tab
DescriptionParameter
Enables or disables automatic focus.
In autofocus mode, the camera adjusts the lens to focus on the subject within
the camera view.
If the autofocus mode is turned off, you can manually adjust the focus. Drag
the slider left to make the lense focus closer, and right to focus further.
Default: On
Auto focus
Enables or disables automatic white balance.
When auto mode is on, the camera examines the lighting condition and
determines the colors to render the image.
When the auto mode is off, you can use the slider to adjust the white balance
manually and get your intended image colors.
Default: On
Auto white balance
If necessary, adjust the contrast value to improve the image clarity.
Drag the slider left to decrease image contrast or right to increase contrast.
Contrast
Adjusts the sharpness level. A proper sharpness level renders the image details
clearly. Drag the slider left to smooth the image or right to sharpen the image.
Sharpness
Cisco Webex Desk Camera User Guide
18
Use Your Camera with the Camera App
Configure the Video Image Settings
To Next Page
Loading...
Need help?
General
