174
BRAKES
CHECKING THE BRAKE PEDAL
Press several times on the brake pedal until any vacuum in the braking amplifier disappears
totally (engine stopped).
Press on the pedal until you feel the start of resistance. Measure the play as indicated in the dia-
gram.
Play C of the brake pedal : 1,0 to 6,0 mm.
If it is not in conformity, check the braking circuit.
Slacken the handbrake. With the engine running, press on the brake pedal. Measure the reserve
travel D of the pedal, as indicated in the diagram.
Reserve travel D of the brake pedal relative to the floor : more than 48 mm at 490 N.
If it is not in conformity, check the braking circuit.
Slacken the handbrake. With the engine running, press on the brake pedal. Measure the reserve
travel D of the pedal, as indicated in the diagram.
Reserve travel D of the brake pedal relative to the floor : more 48 mm at 490 N.
If it is not in conformity, check the braking circuit.
B3F2013D
B3F2014D