[SM-P00081-A]
―15―
3
OPERATION
2) Example of valve number array corresponding to T7EC solenoid output number
In the table below, each valve number (Valve no.) consists of a number (the station number) and an
alphabet (a for a-side solenoid and b for b-side solenoid). For example, “1a” refers to 1st station
a-side solenoid.
Manifold stations are numbered in order from left to right with the piping port towards the user (refer
to the figure below).
Appearance and maximum number of stations differ depending on the solenoid valve model. Check
individual specifications.
N4E0-T7EC1, N4E0-T7ECT1 (16-point output)
< Standard wiring>
● Single solenoid valve:
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a 2a 3a 4a 5a 6a 7a 8a 9a 10a 11a 12a 13a 14a 15a 16a
● Double solenoid valve:
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a 1b 2a 2b 3a 3b 4a 4b 5a 5b 6a 6b 7a 7b 8a 8b
● Mixed (both single and double solenoid valves are mounted) (example):
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a 2a 3a 3b 4a 4b 5a 6a 7a 7b 8a 9a 10a 10b 11a 11b
<Double wiring>
● Single solenoid valve:
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a
-
2a
-
3a
-
4a
-
5a
-
6a
-
7a
-
8a
-
● Double solenoid valve:
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a 1b 2a 2b 3a 3b 4a 4b 5a 5b 6a 6b 7a 7b 8a 8b
● Mixed (both single and double solenoid valves are mounted) (example):
Solenoid Output No
s1 s2 s3 s4 s5 s6 s7 s8 s9 s10 s11 s12 s13 s14 s15 s16
Valve No.
1a
-
2a
-
3a 3b 4a 4b 5a
-
6a
-
7a 7b 8a
-
The figure on the left is an example of mounting eight stations of double-solenoid type manifold valves.
solenoid types, there is no solenoid on the b
Manifold station no.
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
To Next Page
Loading...
Need help?
General
