SIRIUS Satellite Radio Operations
This function
is
available when Sirius Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• SIRIUS Satellite Radio Receiver: SIRCL3
• SIRIUS Satellite Translator Adapter:
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Note:
• When the function is differ
depending
to
the
connected receiver, they are distinguished
by
the following notations:
"SIRIUS": for
a SIRIUS Satellite Radio
Selecting
a Satellite
Radio
mode
1.
Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting
a
band
1.
Press the [BND] button to select a band.
This changes the reception band as follows:
SR1
~
SR2
~
SR3
~
SR1
...
•
Information
displayed
during
reception
The following information
is
displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned
in
(no signal
is
yet received):
SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
SIRIUS: "INVALID CH"
• A channel not covered by your contract:
SIRIUS:
"CALL
888" < > "539-SIRI"
(alternated)
Confirming
your
SIRIUS ID
1.
Press and hold the [DISP] button for 1
second or longer to display the ADJUST
item.
2.
Press the
[l<iliiii
....
] or
[~~]
button to select "SID
DISP".
3.
Press the
[~~~]
button, the display will display
the upper 6 digits.
4.
Press the [
...
] or
[T]
button to switch
between the display for the upper 6 digits
and lower 6 digits.
5.
To return to the previous mode, press the
[DISP] button.
Displaying
channel
labels
1.
Press the [DISP] button to select the desired
channel label.
Channel
~
Category
~
Title (Artist)
~
Radio
text
~
Channel.
..
Channel
selection
1.
Channels are selected with the
[I
........
] or
[~~]
button.
* For details,
see
the following operation
descriptions.
Note:
•
The
audio output is
muted
and
other button
operations are not
accepted
during channel
selection.
Tuning
mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
•
Quick
tuning
1.
Press and hold the
[l<iliiii
....
] or
[~~]
button for 1
second or longer.
• Step
tuning
1.
Press the
[l<iliiii
....
] or
[~~]
button.
CX400
31
SIRIUS Satellite Radio Operations
This function
is
available when Sirius Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• SIRIUS Satellite Radio Receiver: SIRCL3
• SIRIUS Satellite Translator Adapter:
CLA-SC1 (which needs Sirius universal Tuner
sold separately.)
Note:
• When the function is differ
depending
to
the
connected receiver, they are distinguished
by
the following notations:
"SIRIUS": for
a SIRIUS Satellite Radio
Selecting
a Satellite
Radio
mode
1.
Press the [SRC] button.
The system changes to the specified
Satellite Radio mode.
Selecting
a
band
1.
Press the [BND] button to select a band.
This changes the reception band as follows:
SR1
~
SR2
~
SR3
~
SR1
...
•
Information
displayed
during
reception
The following information
is
displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: "UPDATING"
• When a channel is being tuned
in
(no signal
is
yet received):
SIRIUS: "ACQUIRING"
• A channel without a broadcast has been
selected:
SIRIUS: "INVALID CH"
• A channel not covered by your contract:
SIRIUS:
"CALL
888" < > "539-SIRI"
(alternated)
Confirming
your
SIRIUS ID
1.
Press and hold the [DISP] button for 1
second or longer to display the ADJUST
item.
2.
Press the
[l<iliiii
....
] or
[~~]
button to select "SID
DISP".
3.
Press the
[~~~]
button, the display will display
the upper 6 digits.
4.
Press the [
...
] or
[T]
button to switch
between the display for the upper 6 digits
and lower 6 digits.
5.
To return to the previous mode, press the
[DISP] button.
Displaying
channel
labels
1.
Press the [DISP] button to select the desired
channel label.
Channel
~
Category
~
Title (Artist)
~
Radio
text
~
Channel.
..
Channel
selection
1.
Channels are selected with the
[I
........
] or
[~~]
button.
* For details,
see
the following operation
descriptions.
Note:
•
The
audio output is
muted
and
other button
operations are not
accepted
during channel
selection.
Tuning
mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
•
Quick
tuning
1.
Press and hold the
[l<iliiii
....
] or
[~~]
button for 1
second or longer.
• Step
tuning
1.
Press the
[l<iliiii
....
] or
[~~]
button.
CX400
31
To Next Page
Loading...
Need help?
General
