Clarion CX400 User Manual

CD Changer Operations
Note:
•
The following operations are the same as for CD
mode:
*Pause
*Track selection
*Fast-forwardlfast-backward
*Scan play
*Repeat play
*Random play
See "CDIMP3IWMAIAAC Operations" (page 19-
22) for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
* If "NO MAG" appears in the display, insert the
magazine into the
CD changer. "D-CHECK"
appears
in the display while the player loads
(checks) the magazine.
* If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the
CD changer.
Note:
• Some CDs recorded in CD-RICD-RW mode may
not be usable.
A CAUTION
CD-ROM discs cannot be played from every
CD changer, it's depended on the model.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
* Title data for CD-text CDs can be displayed with
this unit only when
it is connected to DCZ625.
1. Press the [DISP] button to change the title
display.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, "NO TITLE" appears
in the
display.
• If a CD-text CD is not input its disc title or a track
title, "NO TITLE" appears
in the display.
Procedure to scroll a title
Set "SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection
"Setting the method for title scroll"
in section "Operations Common to Each
Mode".)
•
When set to "ON"
The title is automatically kept scrolling.
•
When set to "OFF"
To scroll just 1 time.
When you want to see the title again,
in the title
mode, press and hold the [DISP] button for 3
seconds or longer to scroll the title.
Selecting a CD
1. Press the [~.J or ['Y] button to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
pressing the
[~.] or [....] button can not work.
Other various play functions
• Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc
in the
currently selected CD changer. This function
continues automatically until it is cancelled.
* Disc scan play is useful when you want to select a
desired
CD.
1. Press and hold the [SCN] button for 1
second or longer.
"ALL SCAN" appears in
the display and disc scan play starts.
• Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until
it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer.
"ALL RPT" appears in the display
and disc repeat play starts.
• Disc random play
The disc random play selects and plays
individual tracks
or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
1. Press and hold the [ROM] button for 1
second or longer.
"ALL ROM" appears in the
display and disc random play starts.
.To cancel play
1. Press the operating button previously
selected.
CX400
33
CD Changer Operations
Note:
•
The following operations are the same as for CD
mode:
*Pause
*Track selection
*Fast-forwardlfast-backward
*Scan play
*Repeat play
*Random play
See "CDIMP3IWMAIAAC Operations" (page 19-
22) for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
* If "NO MAG" appears in the display, insert the
magazine into the
CD changer. "D-CHECK"
appears
in the display while the player loads
(checks) the magazine.
* If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the
CD changer.
Note:
• Some CDs recorded in CD-RICD-RW mode may
not be usable.
A CAUTION
CD-ROM discs cannot be played from every
CD changer, it's depended on the model.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
* Title data for CD-text CDs can be displayed with
this unit only when
it is connected to DCZ625.
1. Press the [DISP] button to change the title
display.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, "NO TITLE" appears
in the
display.
• If a CD-text CD is not input its disc title or a track
title, "NO TITLE" appears
in the display.
Procedure to scroll a title
Set "SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection
"Setting the method for title scroll"
in section "Operations Common to Each
Mode".)
•
When set to "ON"
The title is automatically kept scrolling.
•
When set to "OFF"
To scroll just 1 time.
When you want to see the title again,
in the title
mode, press and hold the [DISP] button for 3
seconds or longer to scroll the title.
Selecting a CD
1. Press the [~.J or ['Y] button to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
pressing the
[~.] or [....] button can not work.
Other various play functions
• Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc
in the
currently selected CD changer. This function
continues automatically until it is cancelled.
* Disc scan play is useful when you want to select a
desired
CD.
1. Press and hold the [SCN] button for 1
second or longer.
"ALL SCAN" appears in
the display and disc scan play starts.
• Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until
it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer.
"ALL RPT" appears in the display
and disc repeat play starts.
• Disc random play
The disc random play selects and plays
individual tracks
or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
1. Press and hold the [ROM] button for 1
second or longer.
"ALL ROM" appears in the
display and disc random play starts.
.To cancel play
1. Press the operating button previously
selected.
CX400
33

Clarion CX400 Specifications

General

Brand	Clarion
Model	CX400
Category	Car Receiver
Language	English