Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
Disconnect the device and reconnect.
Use only properly encoded MP3IWMAJAAC files.
Insert
an
iPod containing audio files.
Set the correct Parental level.
Use only properly encoded MP3IWMAJAAC files.
Retry or replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
Eject the disc and replace correct region code disc.
This
is
a failure of DVD mechanism and consult your
store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload
it
properly.
This
is
a failure of CD deck's mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
This
is
a failure of CD changer's mechanism and
consult your store of purchase,
The connected devices are
not recognized.
Overcurrent detection.
The files are not proper
MP31
WMA/AAC format.
The iPod contains no audio
files.
The connected devices are
not recognized.
The MP3IWMAJAAC files are
improperly encoded.
Parental level error
Region code error
A DISC inside the DVD
changer cannot be played
because
it
is loaded upside-
down.
A DISC cannot be played due
to scratches, etc.
A CD inside the CD changer
cannot
be
played due to
scratches, etc.
A CD inside the CD changer
cannot
be
played because it
is
loaded upside-down.
A DISC inside the DVD
changer cannot be played.
HUB
ERROR 2
ERROR P
ERROR R
ERROR 3
; (USB/MTP mode)
8. ERROR DISPLAYS
,",:'
ERROR 2 A CD inside the CD changer
is not loaded.
If an error occurs, one
of
the following displays is displayed.
Take
the
measures
described
below
to eliminate the problem.
~;ii;(
iiH·~;~~~~jP!~p"l~Y'ni;
fiI;:!'~;i':;;{~:".:.q!~~~;';.:·.
;~ii
ERROR 2 A CD is caught inside the CD
i~;;;
deck and
is
not ejected.
:j;; ERROR 3 A CD cannot
be
played due
:~
to scratches, etc.
'D;.',: ERROR 6 A CD
is
loaded upside-down Eject the disc then reload
it
properly.
:~~
inside the
CD
deck and does
:0;
not play.
",
ERROR 3
:1,;;:
(iPod mode)
.
t.;:::,,'I--------+-----------+--------------------;
:i'i~
ERROR 5
'I":.
BUS-PWR
:er
~-~~~':~"~
.
If
an
error
display
other
than the
ones
described
above
appears, press
the
reset button. If the
problem
persists, turn off the
power
and
consult
your
store of purchase.
38
CX400
Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
Disconnect the device and reconnect.
Use only properly encoded MP3IWMAJAAC files.
Insert
an
iPod containing audio files.
Set the correct Parental level.
Use only properly encoded MP3IWMAJAAC files.
Retry or replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
Eject the disc and replace correct region code disc.
This
is
a failure of DVD mechanism and consult your
store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload
it
properly.
This
is
a failure of CD deck's mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
This
is
a failure of CD changer's mechanism and
consult your store of purchase,
The connected devices are
not recognized.
Overcurrent detection.
The files are not proper
MP31
WMA/AAC format.
The iPod contains no audio
files.
The connected devices are
not recognized.
The MP3IWMAJAAC files are
improperly encoded.
Parental level error
Region code error
A DISC inside the DVD
changer cannot be played
because
it
is loaded upside-
down.
A DISC cannot be played due
to scratches, etc.
A CD inside the CD changer
cannot
be
played due to
scratches, etc.
A CD inside the CD changer
cannot
be
played because it
is
loaded upside-down.
A DISC inside the DVD
changer cannot be played.
HUB
ERROR 2
ERROR P
ERROR R
ERROR 3
; (USB/MTP mode)
8. ERROR DISPLAYS
,",:'
ERROR 2 A CD inside the CD changer
is not loaded.
If an error occurs, one
of
the following displays is displayed.
Take
the
measures
described
below
to eliminate the problem.
~;ii;(
iiH·~;~~~~jP!~p"l~Y'ni;
fiI;:!'~;i':;;{~:".:.q!~~~;';.:·.
;~ii
ERROR 2 A CD is caught inside the CD
i~;;;
deck and
is
not ejected.
:j;; ERROR 3 A CD cannot
be
played due
:~
to scratches, etc.
'D;.',: ERROR 6 A CD
is
loaded upside-down Eject the disc then reload
it
properly.
:~~
inside the
CD
deck and does
:0;
not play.
",
ERROR 3
:1,;;:
(iPod mode)
.
t.;:::,,'I--------+-----------+--------------------;
:i'i~
ERROR 5
'I":.
BUS-PWR
:er
~-~~~':~"~
.
If
an
error
display
other
than the
ones
described
above
appears, press
the
reset button. If the
problem
persists, turn off the
power
and
consult
your
store of purchase.
38
CX400
To Next Page
Loading...
Need help?
General
