Clarion M606 User Manual

Bluetooth Operations
about tracks (e.g. the elapsed playtime, song
title, etc.) cannot be displayed
on
this unit.
When
an
A2DP device
is
disconnected,
"NO
DEVICE"
will
be shown
on
the display and
the unit
will
return to previously selected
audio source.
Some
Bluetooth audio players
may not have play/pause synchronized with
this unit. Please make sure both device and
main unit are
in
the same play/pause status
in
BT
MUSIC
mode.
ID3 Display
During music streaming playback, for music
information that is longer than the display
panel:
When SCROLL
is
ON, the
LCD will
display
ID3
TAG information, e.g:
ALBUM->
TITLE-> ARTIST
.
.
AUX
Operations
The rear
RCA AUX terminals of this system
is
provided to
allow
playback of sounds and music
from external devices connected to this unit.
Press
[<.!>
SRC]
button
on
the panel to select
"AUX
1"
or
"AUX 2".
AUX
Input Sensitivity
Setting
Select
the
following settings to set the sensitivity
level of the sound from
an
external device con-
nected to this system, that are difficult to hear,
even after adjusting the volume.
*
The factory default setting
is
"MID".
1.
Long press the
[DISP]
button.
2.
Press the [
1J+t
]
button until
"AUX SENSE"
appears
in
the display.
3.
Rotate the
[UP/DOWN]
knob
to select
"HIGH",
"MID"
or
"LOW"
.
Note:
•
When AUX mode is selected, AUX IN sensi-
tivity can be set.
13
M606
When
SCROLL
is
OFF,
the
LCD
will
display
one of the
ID3
TAG information, the default
is
TRACK,
but user can adjust it to other
ID3
TAG information
by
pressing the
[DISP]
button.

Clarion M606 Specifications

General

Brand	Clarion
Model	M606
Category	Marine Equipment
Language	English