Clarion M606 User Manual

SiriusXM
Satallite Radio Operations
Storing Channel Presets
1.
Press [
BND]
button to
select
the desired
band you want to store the preset
in.
There are 3
Satellite
Radio Preset bands.
Each press of [ BND ] button changes the
band:
SXM1
->
SXM2
->
SXM3
->
SXM1
2.
Tune
to
the
desired
channel
and
then
press and hold
one of the preset buttons
(1
-
6)
, to store the
channel.
3.
Repeat
the
procedure
to
store
up to
5
other
channels on the same band.
Note:
•
A
total
of 18
channels
can be stored in
the preset memory, 6
channels
for each
band
(SXM1, SXM2
and
SXM3).
Tuning Channels using Presets
1.
Press [
BND]
button to
select
the desired
band of presets you wish to access.
2. Press the preset button
(1
- 6) that has
your
desired
Satellite
Radio
channel
stored
in
memory.
Category Browsing
1.
Press and
hold
[ BND ] button to activate
the Category Browsing mode.
2.
Rotate
the
[UP/DOWN]
knob to
select
desired category.
3.
Press [
~
]
or
[
..,...
] to
select
desired
channel
within the selected Category. You
can see channel name,
channel
number,
artist,
title
or content by pressing
[DISP].
4. Press [ENT] to tune to
selected channel.
Note:
If
no operation
is
performed for 1
0
seconds,
the Category Browsing mode is
canceled.
Preset Scan
Preset scan receives the
channels
stored
in preset memory in order. This function is
useful
when searching for a desired channel
in
memory.
1.
Press and
hold
the
[PS/AS]
button.
8
M606
2.
When
a
desired
channel
is
tuned
in,
press the
[PS/AS]
button again to
select
that
channel.
Category Scan
This function is
useful
when scanning for a
desired channel
within a specific category.
1.
Press
the
[BND]
button
on
the
panel.
Se
lectable
options CHN/CAT will appear.
2.
Short
Press
[PS/AS]
button
to
begin
channel
scan.
3.
When
the
desired
channel
is
playing,
press the
[PS/AS]
button again to
select
that
channel.
Note:
•
Be
careful
not
to
press
and
hold
the
[PS/AS]
button
for
1
second
or
longer
,
otherwise
the
preset
scan
function
will
begin and the unit starts scanning presets.
Instant Replay
1.
In
SiriusXM mode, press [MENU] button
to enter
INSTANT REPLAY mode.
2.
Press
[~]or
[..,...]button
to skip back
or forward.
3. Press and
hold
[
~
] or [
..,...
] button to
rewind (REW) or fast forward (FF).
4.
Press the [
4 ]
button on the
panel
or
[
~
11
]
on
the
remote
control
for
play/
pause.
5.
Press [MENU] or [ BND ] button to exit.
8/uetooth Operations
BT
Pairing
1.
Turn on
Bluetooth function of your
mobile
device.
2.
Enter
mobile
device's
Bluetooth
setup
menu.
3.
Search for new Bluetooth
devices.
4.
Select
M606
from the pairing
list
on the
mobile
device.
5.
Enter
"
0000"
as
the
password
if
necessary (The password
default
setting
is"
0000
").
6.
After
pairing
successfully
, "BT AUDIO"
will
appear on the
LCD for 1 second.
7.
Press
(<b
SAC]
button
to
select
"BT
AUDIO".
8.
The unit can connect up to three devices.
*
During
pairing,
depending
on
type
of
mobile
device, a six digit
PIN code
will
be
shown on both the source unit's
display
and the
mobile
device.
In
this case,
please
make sure that you
have the same
PIN
code on both devices,
and then confirm on the
mobile
device.
Play/Pause a Track
1.
Press the
[4]
button
or
[..,..II]
button on the
remote
control
to pause audio
playback.
2.
To resume audio
playback,
push the
[4]
button
or
[
..,..II
]
button
on
the
remote
control
again.
Software Updates
Please periodically
check the
Clarion
website for software updates and
improvements for your
Clarion
product.
These updates can be found under the
"Get Support"
tab, then
"Software
Update
I
Download".
Selecting a Track
Track-up
1.
Press the [
11+1
)
button
to
move
to
the
beginning of the next track.
2.
Each time
the
[
11+1
) button is pressed,
playback
proceeds to another
track in the
advancing direction.
Track-down
1.
Press the [
~
] button to
move
to the
beginning of the previous track.
2.
Each time the [
~
] button is pressed,
playback
proceeds
to
previous
track
in
the reverse direction.
Note:
Playing order
will
depend on
Bluetooth
audio
player.
When the [
~]
button is pressed,
some A2DP devices
will
restart the current
track depending on the duration of
playback.
During music streaming
playback, "A2DP"
will
be shown on the
display
.
Information
about
tracks
(e.g.
the
elapsed
playtime,
song
title,
etc.) cannot be
displayed
on this
unit. When an A2DP device is disconnected,
"NO
DEVICE" will
be shown on the
display
and the unit
will
return to previously
selected
audio source.
Some Bluetooth
audio
players
may not have play/pause synchronized with
this unit. Please make sure both device and
main unit are in the same play/pause status
in
BT
MUSIC
mode.

Clarion M606 Specifications

General

Brand	Clarion
Model	M606
Category	Marine Equipment
Language	English