37
English
Owner’s manual
BRIGHTNESS
■ To adjust the brightness of display image.
■ Press the [|◀◀ ] button to make the image darker.
■ Press the
[
▶▶ | ] button to make the image brighter.
DIMMER
■ To adjust the brightness of the LCD when the car lights are on/off.
■ [DAY] : Brightness of the LCD is always set to maximum level.
■ [NIGHT] : Brightness of the LCD is always set to user setting level.
■ [AUTO] : According to the status of the car light, brightness of the LCD is changed.
(When the car light is
off : DAY color, on : NIGHT color)
1-2. MONITOR ADJUST : At DVD, AUX Mode
BRIGHT
■ To adjust the brightness of display image.
■ Press the [|◀◀ ] button to make the image darker.
■ Press the
[
▶▶ | ] button to make the image brighter.
DIMMER
■ To adjust the brightness of the LCD when the car lights are on/off
■ DAY : Brightness of the LCD is always set to maximum level.
■ NIGHT : Brightness of the LCD is always set to user setting level.
■ AUTO : According to the status of the car light, brightness of the LCD is changed.
(When the car light is off : DAY color, on : NIGHT color)
COLOR
■ To adjust the color depth
■ Press the [|◀◀ ] button to decrease the color depth.
■ Press the
[
▶▶ | ] button to increase the color depth.
■ This function enables to adjustments of the values on the VIDEO-play / DVD MODE/ AUX
MODE/ iPod VIDEO MODE.
MONITOR ADJUST
CAMERA INT.
CAMERA WARNING
NTSC/PAL/AUTO
CLOCK
BEEP
TEL SWITCH
TEL SPEAKER
ADJ
GENERAL
MONITOR
BRIGHT
COLOR
HUE
DIMMER
1. MONITOR
Press and hold the [OPT] button for more than 2 seconds to enter into ADJUST mode. Press the
[ENT] button to adjust detail items.
MONITOR ADJUST
■ To adjust the BRIGHT, COLOR, HUE, DIMMER
CAMERA INT
■ ON : To turn rear camera on when reverse line is activated
■ OFF : To ignore reverse line not to be interrupted by camera
CAMERA WARNING
■ When you are using CCD camera, select the ON vallue if you want to see the warning
message. Select the OFF value if you do not want to.
NTSC/PAL/AUTO
■ To set the VTR system for AUX video input. When selecting AUTO mode, the monitor will
automatically select the video system according to the input video signal.
1-1. MONITOR ADJUST : At TUNER, iPod, USB Mode
Select the [ADJUST] item of the "MONITER ADJUST" in the ADJUST mode.
ADJUST Operations
To Next Page
Loading...
Need help?
General
