IGS-NT Communication Guide
2
Table of contents
1 Document information 7
1.1 Clarification of notation 7
1.2 About this guide 7
1.3 Legal notice 7
1.4 Document history 9
1.5 Definition of terms 9
2 Controllers communication capabilities 11
2.1 IG/IS/IM-NTC-BB - Communications 12
2.2 IG/IS/IM-NTC-BB - Terminals 13
2.3 IG/IS/IM-NTC-BB - Peripheral modules 14
2.4 IG/IS/IM-NTC-BB - Jumpers settings 15
2.5 IG/IM-NT-BB - Communication 16
2.6 IG/IM-NT-BB - Terminal 17
2.7 IG/IM-NT-BB - Peripheral modules 18
2.8 IG/IM-NT-BB - Jumper settings 19
2.9 IG-NT - Communications, Terminals 20
2.10 IG-NTC - Communication, Terminals 21
2.11 IM-NT - Communications, Terminals 22
2.12 IS-NT-BB - Communications, Terminals 23
3 Applications overview 24
3.1 Direct PC connection to Single gen-set 24
3.1.1 RS232 connection 24
3.1.2 USB connection 25
3.1.3 RS485 connection 26
3.1.4 Ethernet connection (Direct) 27
3.2 Direct PC connection to Multiple gen-sets 29
3.2.1 RS485 connection 29
3.2.2 RS232/485 connection (I-LB+) 31
3.2.3 USB connection via I-LB+ module 32
3.2.4 Ethernet connection via IB-NT 34
3.2.5 Ethernet connection (Direct) 35
3.3 Monitoring Local on site - MODBUS 36
3.3.1 RS232 ModBus 36
3.3.2 RS485 ModBus 38
3.3.3 Ethernet - MODBUS/TCP (Direct) 39
To Next Page
Loading...
Need help?
General
