COMENDA C1000E User Manual

INSTRUCTIONS FOR TECHNICAL PERSONNEL
36
6.2 CHANGING "t" and "L" PARAMETERS
Choose the cycle to change using the "S9" button.
Press the "S10" button to enter the programming phase.
??The display shows "t.1. .".
Press "S3" to view the value set for the tank temperature of the cycle
selected.
Use the "S9" and "S10" buttons to decrease or increase the value of the
temperature.
Press "S3" again to confirm and proceed to the choice of the subsequent
parameters (in sequence t2-L1-L2-L3-L4-L5).
To exit the programming environment just do not press any button for at least 10
sec.
STANDARD SETTINGS OF T AND L PARAMETERS
PARAMETRO
FUNZIONE
SHORT
CYCLE
(H9a)
MEDIUM
CYCLE
(H9b)
LONG
CYCLE
(H9c)
INTENSIVE
CYCLE
(H9d)
C1000
C1300
C1000
C1300
C1000
C1300
t1
TANK
TEMPERATURE
55°C 55°C 55°C 55°C 55°C 55°C 55°C
t2
BOILER
TEMPERATURE
85°C 85°C 85°C 85°C 85°C 85°C 85°C
L1
WASH TIME
42sec.
27sec.
77sec.
67sec. 127sec.
97sec.
480sec.
L2
PAUSE TIME
5sec. 5sec. 5sec. 5sec. 5sec. 5sec. 5sec.
L3
RINSE TIME
18sec.
18sec.
18sec.
18sec. 18sec.
18sec. 18sec.
L4
OSMOSIS RINSE
TIME
(optional)
(15) (15) (15) (15) (15) (15) (15)
L5
DRAIN TIME
(optional; for
Dumper machines)
(00) (00) (00) (00) (00) (00) (00)
6.3 STANDARD PARAMETERS CONFIGURATION
N.B.: Pressing the "S10" button for 10 sec when the machine is off
automatically configures all the parameters (P-T-L) as shown in the Table.
??The display shows "P.S.t." to confirm the programming.
ATTENTION: See page "76" to charge the configuration standard.

COMENDA C1000E Specifications

General

Brand	COMENDA
Model	C1000E
Category	Dishwasher
Language	English