INSTRUCTIONS FOR THE USER
25
OPERATION AND USE
HOW TO USE
1 Before using check that:
-it is plugged in
-the water supply is on
-there is water in the pipe
-the pump filter is correctly inserted
-the overflow pipe is connected
-the blades may move freely
-temperatures used are those which are recommended at 55°C for washing
and 85°C for rinsing.
-the crockery to be washed is in good condition and not cracked, as the
cracks offer more opportunity for the soiling to remain and floral bacteria to
grow.
SWITCHING ON
??When the machine is off, the display shows "O.F.F."
2 To turn on the machine press the "Q1" switch.
The indicator light of the last cycle selected turns on ("H9 a-b-c-d").
The "H9b" indicator light turns on the first time the machine is turned on.
During the loading of the tank the display shows "F. .2.".
When the loading is completed, the boiler and tank heaters are turned on.
When the machine is ready, the display shows the tank temperature and
turns on the selected cycle indicator light.
Put into the filter in the tank the correct amount of chlorinated industrial
detergent according to the manufactures recomendation.
Using detergents which are chlorated and sanitized, they should be placed in
the machine using an automatic dosage device as when the detergent is
poured directly into the tank the possibility of formulation of dark spots may
appear on the surfaces as a result of the clorate
Dishes should now be put into suitable positions in the racks, after the
removal of solid waste. Cups and cutlery should be placed vertically in the
suitable compartment. Do not overload. The dishes should not be overlapped
in such a way as the water cannot reach every surface of the dish.
To Next Page
Loading...
Need help?
General
