INSTRUCTIONS FOR THE USER
27
IMPORTANT
N.B.: Machine in conformity with the existing hygienic standards,
guaranteeing a final rinse at 82°C. Wash cycle automatically lengthened
if final rinse temperature is not reached.
To avoid the machine blocking in this intervention, after 8 minutes the
intervention is stopped and the cycle continues.
INTERRUPTION AND END OF WASH CYCLE
5 It is possible to momentarily interrupt the wash cycle by raising the hood;
the operations will resume by lowering it.
Turning off the machine using the "Q1" switch terminates all active
cycles.
Upon turning on the machine again, the indicator light of the last cycle
selected will light and the display will show the alarm code "A. .1." until a
new cycle starts.
At the end of the cycle, remove the rack at an incline and shake carefully to
remove any remaining drops or residue.
Leave dishes to dry and take out rack with clean hands, paying attention to
not touch internal parts and borders. Remove dishes and place in a hygenic
location.
SELF CLEANING AND DRAIN CYCLE
6 At the end of the wash operations turn off the machine by pressing the
"Q1" switch.
After having removed the overflow pipe and lowered the hood, press the
"S3" button for 3 sec.
The self cleaning and drain cycle will start, turning on the drain pump for
machines equipped with it.
??The display will show "C. .1." during the entire cycle (2 min.
and 30 sec.).
At the end of the autowash cycle, remove the tank filter to clean and replace
along with the overflow hose in the correct position. For further information
regarding the accessories please look under the section “USEFUL
INFORMATION”.
To Next Page
Loading...
Need help?
General
