INSTRUCTIONS FOR TECHNICAL PERSONNEL
39
ELECTRICAL INFORMATION
A1 control console
A2 printed circuit board
B2 Drill for boiler temperature
B3 Drill for tank temperature
C1 noise filter
E2 Boiler heater
E3 Tank heater
F Main fuse
F3 Wash pump overload relay
FA2 Printed circuit fuse
H9.... Cycle selected indicator lamp
H10 Display
K1 Main relay
KE2 Boiler heater contactor
KE2b Boiler heater safety contactor
KE3 Tank heater contactor
KM3 Wash pump contactor
KMC Sanitizer dispenser relay (by request)
M2 Rinse booster pump (by request)
M3 Wash pump
M5 Drain pump (by request)
MC Sanitizer dispenser (by request)
MD Detergent dispenser (by request)
Q1 Main switch
S1 Door microswitch
S2 Pressure switch
S3 Start push button
S9 Cycle select push button
S10 Temperature select push button
SE2b Boiler heater safety thermostat
X1 terminal block
Y1 rinse solenoid valve
Y4 regenaration solenoid valve (by request)
The Manufacturer takes no responsibility for any printing errors in this
manual. The Manufacturer reserves the right to modify products, if necessary,
without changing the main characteristics of the product.
To Previous Page
Loading...
Need help?
General
