ToolUse and Care
• Use clamps or another practical way to secure
and support the workplece to a stable plat-
form. Holdingthe work byhand or againstyour
bodyis unstableand may leadto lossof control.
• Do not force tool. Use the correct tool for your
application. The correcttoolwill dothe job better
and safer at the rate for which it is designed.
• Do not use tool If switch does not turn R on or
off. Any tool that cannot be controlledwiththe
switchisdangerousand mustbe repaired.
• Disconnect the plug from the power source
before making any adjustments, changing
accessories, or atodng the tool. Such preven-
tivesafety measures reducethe riskof startingthe
toolaccidentally.
• Store Idle tools out of the reach of children and
other untrained persona. Toolsare dangerousin
the handsofuntrainedusers.
• Maintain tools with care. Keepcuttingtools
sharpand cieen. Propedymaintainedtoolswith
sharpcuttingedges are less likelyto bindand are
easier tocontrol.
• Check for mlcellgnment or binding of moving
parts, breakage of parts, end any other condi-
tion that may affect the tool's operation. If
damaged, have the toolserviced before using.
Many accidentsare caused bypoorlymaintained
tools.
• Use only accessories that are recommended
by the manufacturer for your model. Accesso-
riesthat may be suitablefor one toolmay become
hazardouswhen used on anothertool.
Service
• Tool service must be performed only by quail-
fled repair personnel. Serviceor maintenance
performedby unqualifiedpersonnelcould resultin
a riskof injury,
• When servicing a tool, use only identical
replacement parts. Follow Inatructlons in the
Malntenanca section of this manual. Use of
unauthorizedpartsor failureto followMaintenance
Instructionsmay createa riskof electdcshockor
injury.
To Next Page
Loading...
Need help?
General
