12-4
12. TIRES, WHEELS AND BALLAST
Ex2900 / 3200 Operator's Manual
■ Front Ballast
To improve stability and traction, add ballast as needed.
Heavy pulling and rear-mounted implements can cause
the front wheels to lift. To cope with this situation, add
ballast so that reliable steering control is maintained and
tip-over of the tractor is prevented. Remove the ballast
when no longer necessary.
Front End Weights (option)
The front end weights can be installed on the bumper. For
an appropriate number of weights, see the information
given below on this page.
Required number of front end weights when mounting
Cub Cadet Yanmar implements
(A) Front end weights (option)
(B) Bumper
●NEVER overload the tires.
●NEVER add weight in excess of the limits indicated below.
For the front ballast, refer to the information about
maximum weight provided below.
For the rear ballast, refer to “Using Liquid Weight for the
Tires” in page 12-5.
3. Ballast
No Implement Name Number of Weight
160" Rotary Cutter 5
2 72" Grooming Mower 5
3 60" Flail Mower 3
4 60" Box Scraper 0
5 72" Rear Blade 0
6 60" Landscape Rakes 0
7 66" Rotary Tiller 0
8 Broad Caster 0
9 Post Hole Digger 0
WARNING
3013715
(A)
(B)
To Next Page
Loading...
Need help?
General