11
16
17
30
360° ROTATION
The car seat can be rotated 360°, in order to help to put your
child into and take your child out of the vehicle. This also allows
you to change the position of the seat from rearward-facing to
forward-facing.
• In order to be able to rotate the seat shell (16), you must first press
the position adjustment handle (11) and while keeping the handle
pressed, bring the seat shell into a completely upright position.
• Now you can rotate the seat shell (16) towards the door and
strap the child in without difficulty. See chapter, “SECURING
BY MEANS OF HARNESS SYSTEM”.
• Rotate the seat shell (16) back to its original position. As soon
as the neutral position is reached, the seat must be locked at
least into the first sitting position. This can be noticed by an
audible “CLICK”.
• Next control if the indicator (17) on the Base is GREEN. If the
indicator shows RED, the seat is not locked well. Repeat the
process if necessary.
NOTE! Only when the car seat is in most upright position and
the indicator (17) shows RED, the car seat can be rotated. The
seat can only be rotated forward-facing when the forward facing
use has been released by moving the switch in the backrest.
NOTE! Before starting your journey you must return the seat
shell (16) to a defined travel position locked in place.
NOTE! Make sure that the seat shell (16) is correctly locked
into place by trying to rotate it, without pressing the position
adjustment handle (11).
NOTE! We suggest to kindly deactivate the L.S.P. before rotating
the seat. For details see chapter "ADJUSTING THE SIDE
PROTECTORS".
To Next Page
Loading...
Need help?
General
