CLICK!
CLICK!
42
• the ISOFIX connectors are correctly fastened to the vehicle
and the support leg has been correctly installed.
• the seat is locked in either rear or forward facing position.
• the headrest has been adjusted to the correct height.
• the 5-point belt system has been correctly adjusted to the size
of the child, the shoulder belts have not been twisted and the
belt system has been locked.
Newborns and infants who are not yet able to sit up by
themselves (up to around 1 year) should, for orthopaedic and
safety reasons, always be transported in the flattest recline
position rearward-facing.
SECURING THE CHILD CORRECTLY
To ensure optimum safety for your child, please always check
before commencing travel that…
REMOVING THE NEWBORN INLAY
The preinstalled newborn inlay helps to support lying comfort
and fit for the smallest babies. The newborn inlay 24 may be
removed after the baby is 61 cm (approx. 3 months) to provide
more space for the child. To remove the newborn inlay 24 open
the snap buttons of the headrest cover. Now first pull off the
headrest cover and then remove the newborn insert. After that
put the headrest cover back in place, reposition the shoulder
belts and finally close the snap buttons again. Before washing
the newborn inlay, please remove the foam in newborn inlay via
dedicated slots. You can put the foams back through the solt
after the newborn inlay is washed and dried.
24
To Next Page
Loading...
Need help?
General
