34D-Link DCS-910 User Manual
Section 3 - Configuration
Time Schedule
Enable upload image to
FTP server:
Always:
Schedule:
Video Frequency:
Base File Name:
File:
Test FTP Server:
Checking this box will enable video upload to the FTP server you have selected.
Selecting this option allows snapshots to be uploaded to your FTP as soon as you click Apply.
Selecting this option allows you to configure the times that you want the snapshots to be uploaded to your FTP server.
User can select in frames per second (1, 2, 3 or auto, in auto this could go to 4). The user can also select how many seconds for each
frame, this is congurable from 1 to 65535 seconds.
This will be the name that precedes the time, for example DCS9102008072116425101.jpg. This means that the camera took a snapshot
in the year 2008, July 21 at 16th hour (4 o’clock), 42 minutes and 51 seconds and it is picture number one.
Select Overwrite and there will only be a few images that are constantly refreshed depending on how many snapshots you choose to have
sent. Select Date/Time Suffix and the pictures will be named with a date and time also. An example of this can be seen above under the
Base file name category. Select Sequence Number Suffix up to 1024 and all the pictures will be numbered from 1-1024. The total amount
of pictures can be configured up to 1024 pictures. Picture number 1025 will be 1 again.
This will send a snapshot to the FTP server that you have configured in the Upload section. If you have congured the FTP correctly, you
will be able to see a test file in your FTP server.
To Next Page
Loading...
Need help?
General
