Name: D-Link DGS-1510- 52XMP
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide

5. Web-based Switch Configuration

Introduction

Logging onto the Web Manager

Web-based User Interface

Introduction

Most software functions of the Switch can be managed, configured, and monitored via the embedded

Web User Interface (Web UI). Manage the Switch from remote stations anywhere on the network

through a standard browser, such as Internet Explorer (version 7 and later), Mozilla Firefox, Chrome,

or Safari. The browser acts as a universal access tool and can communicate directly with the Switch

using the HTTP protocol.

Logging onto the Web Manager

To access the Web UI, simply open a standard web browser on the management PC, enter the

Switch’s default IP address into the address bar of the browser and press the Enter key.

NOTE: The default IP address of this switch is 10.90.90.90, with a subnet mask of

255.0.0.0.

Figure 5-1 IP address in Internet Explorer

NOTE: The default username is admin and the default password is admin.

This will open the user authentication window, as seen below.

Figure 5-2 Enter Network Password Window

Enter the User Name and Password in the corresponding fields and click Login. This will open the

Web UI. Management features available in the Web UI of the Switch are explained below.

Questions and Answers:

Need help?

Do you have a question about the D-Link DGS-1510- 52XMP and is the answer not in the manual?

D-Link DGS-1510- 52XMP Specifications

General