D-Link DHP-W310AV User Manual

17D-Link DHP-W310AV User Manual
Section 3 - Conguration
LAN Settings
This section will allow you to change the local network settings of the DHP-W310AV and to congure the DHCP settings.
Enter the Device Name of this DHP-W310AV.
You will use this name to connect to it
through a web browser. The default name
is listed on your Wi-Fi Conguration Card.
Use the drop-down menu to select Dynamic
IP (DHCP) to automatically obtain an IP
address on the LAN/private network. For
Static IP setup, see the next page.
Your Internet Service Provider (ISP) may
require this to be set a certain way for
Internet access. Contact your ISP regarding
such requirements.
This shows the current IPv6 address of the
DHP-W310AV on your network.
Click Save Settings to save and activate the
new changes.
Device Name:
LAN Connection
Type:
IPv6 Connection
Type:
LAN IPv6 Address
Settings:
Save Settings:

D-Link DHP-W310AV Specifications

General

Wi-Fi	No
Modulation	OFDM
Power plug	-
Ethernet LAN	Yes
PowerLine standard	HomePlug AV
Security algorithms	128-bit AES
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	1
Maximum data transfer rate	200 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Certification	FCC, CE EMC B, UL, CE LVD
Product color	White
LED indicators	LAN, Power
Current	0.1 A
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	4 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	42.4 mm
Width	61 mm
Height	68 mm
Weight	125.6 g