D-Link DIR-506L User Manual

26D-Link DIR-506L User Manual
Section 3 - Conguration
Entering a host name is optional but may be required by
some ISPs. Leave this blank if you are not sure.
Check the box if you are having problems obtaining an
IP address from your ISP.
Enter the Primary and secondary DNS server IP addresses
assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Leave this setting at 0.0.0.0 if
you did not specically receive these from your ISP.
If you experience connection issues, you may need to
change the MTU setting for optimal performance with
your specic ISP. 1492 is the default MTU.
If your ISP requires you to enter a MAC address, ll it in
here. You can click the Clone MAC button to enter your
current computer’s MAC address.
Host Name:
Use Unicasting:
Primary/
Secondary DNS
Server:
MTU:
MAC Address:
If you selected Dynamic IP (DHCP), you will see the following settings.

D-Link DIR-506L Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	1
USB version	2.0
Rack mounting	No
DHCP client	-
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2, WPS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	22.3 mm
Width	102.9 mm
Height	79.8 mm
Weight	125 g