D-Link DIR-506L User Manual

51D-Link DIR-506L User Manual
Section 3 - Conguration
SNMP Local:
SNMP Remote:
Get Community:
Set Community:
IP 1:
IP 2:
IP 3:
IP 4:
SNMP Version:
WAN Access IP
Address:
SNMP
Enable this option to allow local SNMP management.
Enable this option to allow remote SNMP management.
Enter a name for the read community of your SNMP server.
Enter a name for the write community of your SNMP
server.
Set the rst IP address to be managed here.
Set a second IP address to be managed here.
Set a third IP address to be managed here.
Set a fourth IP address to be managed here.
Choose the version of SNMP to be used by your server.
Enter the IP address used for WAN access here.
The Simple Network Management Protocol is an application layer protocol to remotely manage network devices so you can
nd and solve network problems with ease. After making your changes, click the Save Settings button.

D-Link DIR-506L Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	1
USB version	2.0
Rack mounting	No
DHCP client	-
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2, WPS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	22.3 mm
Width	102.9 mm
Height	79.8 mm
Weight	125 g