D-Link DIR-506L User Manual

42D-Link DIR-506L User Manual
Section 3 - Conguration
This section will allow you to change the local network settings of the router and to congure the DHCP settings. After making
your changes, click the Save Settings button.
Network Settings
Enter the IP address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the conguration utility.
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enter a name for the DIR-506L.
Check this box to enable the DHCP server on your router.
Uncheck to disable this function.
The length of time for the IP address lease. Enter the Lease
time in minutes.
Congure the IP address of the preferred DNS server.
Congure the IP address of the backup DNS server, if any.
Congure the IP address of the preferred WINS server.
Congure the IP address of the backup WINS server, if any.
Router IP
Address:
Default Subnet
Mask:
Local Domain
Name:
Enable DHCP
Server:
DHCP Lease
Time:
Primary DNS
IP Address
Secondary DNS
IP Address
Primary WINS
IP Address
Secondary WINS
IP Address
Router Settings

D-Link DIR-506L Specifications

General

Ethernet LAN	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	1
USB version	2.0
Rack mounting	No
DHCP client	-
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2, WPS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	22.3 mm
Width	102.9 mm
Height	79.8 mm
Weight	125 g