DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
WPS
On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and
select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
Before using the function you need to configure one of the following authentication types:
Open with no encryption, WPA-PSK , or WPA2-PSK with the AES or TKIP+AES
encryption method (on the Wi-Fi / Security settings page).
Figure 113. The page for configuring the WPS function.
Page 138 of 197
To Next Page
Need help?
Device Interface
Weight and Dimensions
