EasyManuals Logo
Home>D-Link>Wireless Router>DIR-860L

D-Link DIR-860L User Manual

D-Link DIR-860L
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
34D-Link DIR-860L User Manual
Section 3 - Conguration
DNS Servers:
MTU:
MAC Address:
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PCs MAC Address button to
replace the Internet ports MAC address with the MAC address of your Ethernet card.

Table of Contents

Other manuals for D-Link DIR-860L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-860L and is the answer not in the manual?

D-Link DIR-860L Specifications

Device Interfaces IconDevice Interfaces
wireless LAN802.11 a/b/g/n/draft ac
LAN portsFour 10/100/1000 Gigabit
WAN port10/100/1000 Gigabit
USB portUSB 3.0
Power IconPower
input voltage100 to 240 V AC
input frequency50/60 Hz
output voltage12 V DC
output current2 A
USB port power voltage5 V
USB port power current0.9 A
Operating Environment IconOperating Environment
operating temperature0 °C to 40 °C (32 °F to 104 °F)
humidity95% maximum (non-condensing)
Weight and Dimensions IconWeight and Dimensions
length10.23 cm (4.03 inches)
width12.33 cm (4.85 inches)
height21.7 cm (8.54 inches)

Related product manuals