D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
DLNA
On the USB Storage / DLNA page, you can enable the built-in DLNA server of the router to
provide access to the USB storage for users of your LAN.
The built-in media server allows DLNA certified devices of your LAN to play multimedia content
of the USB storage. Multimedia content can be played only when a USB storage is connected to the
router.
Figure 114. The USB Storage / DLNA page.
To enable the DLNA server, move the Enable switch to the right.
In the Update interval field, specify the time period (in seconds), at the end of which the media
server updates the file list of the USB storage, or leave the value specified by default (900).
In the DLNA server name field, specify a name of the DLNA server which will be displayed for
users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits
and/or Latin characters.
To allow access to the content of the USB storage for users of your LAN, click the ADD button in
the Media Folders section.
Page 146 of 210

D-Link DSL-2750U Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Media Interface

ADSL interface connector type	RJ-11
ADSL interface cable type	24/26 AWG twisted pair telephone line
LAN interface port type	RJ-45
LAN interface standard	10/100BASE-T Ethernet