DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
URL Filter
On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.
Figure 146. The Firewall / URL Filter page.
To enable the URL filter, in the General Settings section, move the Enable switch to the right,
then select the needed mode from the Type drop-down list:
• Block listed URLs: when this value is selected, the router blocks access to all addresses
specified in the Filters section;
• Block all URLs except listed: when this value is selected, the router allows access to
addresses specified in the Filters section and blocks access to all other web sites.
Click the APPLY button.
To specify URL addresses to which the selected filtering mode will be applied, in the Filters
section, click the ADD RULE button and enter a relevant address in the displayed line. Then click
the APPLY button.
To remove an address from the list of URL addresses, click the Delete icon ( ) in the line of the
relevant URL address. Then click the APPLY button.
Page 185 of 210
To Next Page
Loading...
Need help?
Data Transfer Rates
