D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Operation Guidelines
CHAPTER 5. OPERATION GUIDELINES
Safety Rules and Conditions
Please carefully read this section before installation and connection of the device. Make sure that
the power adapter and cables are not damaged. The device should be used only as intended in
accordance with the documents.
The device is intended for use in dry, clean, dust-free, and well ventilated areas with normal
humidity away from strong heat sources. Do not use the device outdoors or in the areas with high
humidity. Do not place foreign objects on the device. Do not obstruct the ventilation openings of the
device. The environmental temperature near the device and the temperature inside the device's
cover should be within the range from 0 °С to +40 °С.
Only use the power adapter supplied with the device. Do not plug in the adapter, if its case or cable
are damaged. Plug the adapter only into working electrical outlets with parameters indicated on the
adapter.
Do not open the cover of the device! Unplug the device before dusting and cleaning. Use a damp
cloth to clean the device. Do not use liquid/aerosol cleaners or magnetic/static cleaning devices.
Prevent moisture getting into the device or the power adapter.
The service life of the device is 2 years.
Page 206 of 210

D-Link DSL-2750U Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Media Interface

ADSL interface connector type	RJ-11
ADSL interface cable type	24/26 AWG twisted pair telephone line
LAN interface port type	RJ-45
LAN interface standard	10/100BASE-T Ethernet